Here at Rock Tactics, the people who design and engineer our products, are always looking for ways to raise the bar.
It's what set's us apart from the other guys.
We are always looking for something to be faster, lighter, better, tighter, etc. We believe in better products through better design. So when it came to spring hangers, we felt there was room to improve what is currently available on the market. We started with a piece of laser cut quarter inch steel. We add relief cuts to the bent edges, in order to keep the corners from "flaring" at the ends. We cut the hangers for 1/2" hardware, which gives you the option to drill out for larger hardware if you choose.
The bolt holes are cut in a way that mounts your spring eye as close to the frame as possible, to eliminate un-necessary lift. Then we added two additional holes to the hanger to give you options for tuning your suspension for the rocks, or for the desert. Then we top it off with a tig welded ramp face to box the hanger in, and help you to better slide over rocks and other obstacles.
These spring hangers have been successfully tested and run in the King Of The Hammers Race in Johnson Valley, and we feel they are the best designed hanger on the market.
Note: This bracket may come with relief cuts in the bent corners to help with bending the body during manufacturing. All relief cuts will require finish welding prior to installation.