This is hands down one of our most popular kits.
Many of our customers are running Chevy springs in the back of their Toyota truck or 4runner. The Chevy 63" rear leaf springs, have become the choice spring for a lot of the builds out there. Since the Chevy spring was found under so many vehicles, for several years, these springs can be found in wrecking yards for under $100, all day long. They are cheap, and they flex.
Since these springs are so long, they require re-mounting your spring and shackle hangers, in order to mount them up. That's why we decided to come out with our version of the Chevy spring swap kit. We decided to give you only the components that you absolutely need to have. We start off with a pair of our single hole, Podium Series spring hangers, with tig welded gussets. Then we give you a set of our podium series shackle hangers, which are fully boxed and tig welded together. Finally we give you 4 of our 3/8" thick, 6" long, heavy duty shackle plates. This gives you everything you need to mount these springs underneath any rig of your choice. You source your own hardware and U-Bolt flip kits.
When you buy this kit, we give you an automatic discount over buying the components individually.
The benefits of this kit over our DIY kit are as follows:
- Tig welded Shackle Hangers
- Tig welded Spring hanger gussets
- 3/8" thick, Industry Standard Shackle Plates
Note: Our shackles are drilled for 1/2" hardware.